With the sprayer hose and supply lines out of your way, you’ll have unimpeded access to the large, flat mounting nuts that hold the faucet to the sink. These nuts are often plastic and easy enough to remove by hand by twisting them counterclockwise. If not, hook the basin wrench around the nut and twist it counterclockwise until they’re loose enough to remove by hand. Once you have disconnected both the hot and cold water supply lines to the faucet and the side spray hose, then just lift the old sink up and out of the sink. Read more about kitchen faucet pull out hose here. After gathering the supplies and the new faucet, shut off the water to the existing faucet. To successfully install a single-handle kitchen faucet with sprayer, the required tools are adjustable wrench, basin wrench, plumber’s tape, and a plumber’s putty. Before proceeding with this step, make sure to turn off both hot and cold water supply valves under the sink.
This is an important step that should not be overlooked as it ensures a safe and tidy environment for you and your family. Start by wiping down the sink area with a damp cloth to remove any debris or dust that may have accumulated during installation. The purpose of this weight is to keep the sprayer in place and prevent it from dangling when not in use. To do this, slide the hose weight over the spray hose and position it about 6 inches above where it connects with your faucet body. Before starting this step, make sure that you have all the necessary parts and tools at hand.
We are very happy with the quality of workmanship
These models have what we call “diverters” built in, ready for a sprayer. Our focus will be on the under-counter parts, not the faucet itself. After connecting the faucet to your water supply, turn on the faucet and check for any faucet leaks. Pay particular attention to the gasket where the sink meets the faucet and also to the supply line and valve connections under the sink.
Step 9: Turn Water On
Luckily, knowing how to install a kitchen faucet is a fairly straightforward project you can complete in five steps. There are many different types of kitchen faucets available on the market today. Each type has its own advantages and disadvantages, so it is important to choose the right one for your needs.
The consistency of plumber’s putty is similar to that of Play-Doh. You’ll first want to warm the putty in your hands until it is soft. Then stretch and roll the putty into a long, snake-like tube.